Filter
Top Products
6-33
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show diagnostic card
show diagnostic card
To display completed or ongoing diagnostic tests for cards, enter the
show diagnostic card
command
in User Exec mode or Privileged Exec mode.
show diagnostic card {all | card-selection}
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Command Output:
Table 6-10 describes the fields in the
show diagnostic card
command.
Examples The following example displays the completed and ongoing diagnostic tests on card 3:
SFS-7000P# show diag card 3
================================================================================
Diagnostic Tests For Cards
================================================================================
all Specifies all cards on the Server Switch.
card-selection Card or cards with the tests that you want to view.
Table 6-10 show diagnostic card Command Field Descriptions
Field Description
test Test that ran or runs on the card.
slot-id Slot of the card.
iterations Number of iterations that the test completed.
action Last action that an administrator applied to the test.
result Result of the last action that an administrator applied to the test.
percentage-completed Percentage of the test that has executed.
result-string Diagnostic test results.