Filter
Top Products
5-2
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 5 IP Commands
arp ethernet
arp ethernet
To statically map an IP address to the physical machine address of an Ethernet host on the local network,
enter the
arp ethernet
command in Global Configuration mode. To clear a static IP address, use the
no
form of this command.
arp ethernet
ip-address mac-address slot#
/
port#
no arp ethernet
ip-address mac-address
Syntax Description
Defaults This command has no default settings.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-write user.
The Server Switch supports dynamic ARP so that any IP host that connects to an Ethernet gateway port
may see or detect all the other connected IP and IPoIB hosts.
An ARP table contains the available ARP records in the gateway. An ARP record may be dynamically
learned or statically created. In most cases, you can rely upon dynamic ARP addressing. Dynamic ARP
records may be deleted from the table after a period of time, or updated, if a host address-change occurs.
Examples
SFS-7000P(config)# arp ethernet 10.2.0.50 00:30:48:23:A9:0A 4/1
Related Commands show arp ethernet
ip-address IP address of the host.
mac-address MAC address of the host.
slot# Slot on the Server Switch that holds the Ethernet gateway that connects to
the host.
port# Ethernet gateway port that connects to the host.