Filter
Top Products
6-158
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface fc
Table 6-61 describes the fields in the
statistics
keyword output.
oper-connection-type Indicates the type of connection dynamically discovered for the
interface port.
link-trap Indicates if connection link errors are to be captured and sent to trap
recipients. The value may be either enabled or disabled. This field is set
by the
link-trap
command.
Table 6-60 show interface fc Command Field Descriptions (continued)
Field Description
Table 6-61 statistics Keyword Output Field Descriptions
Field Description
port Fibre Channel gateway port number, in slot#/port# format.
name Administratively assigned or default name of the port. The default name
is the port name in the form slot#/port#. Configure this field with the
name
command. The number in parentheses to the right of the name is
the SNMP identifier. The SNMP identifier is useful if you are running
your own SNMP software.
in-octets Cumulative number of octets received on the interface, including framing
characters.
in-ucast-pkts Cumulative number of packets, delivered by this sub-layer to a higher
layer, that were not addressed to a multicast or broadcast address at this
sub-layer.
in-multicast-pkts Cumulative number of packets, delivered by this sub-layer to a higher
layer, that were addressed to a multicast address at this sub-layer. For a
MAC layer protocol, this includes both Group and Functional addresses.
in-broadcast-pkts Cumulative number of packets, delivered by this sub-layer to a higher
layer, that were addressed to a broadcast address at this sub-layer.
in-discards Cumulative number of inbound packets that were discarded even though
no errors had been detected to prevent their being delivered to a
higher-layer protocol. One possible reason for discarding such a packet
can be to free-up buffer space.
in-errors For packet-oriented interfaces, the cumulative number of inbound packets
that contained errors that prevented them from being delivered to a
higher-layer protocol. For character-oriented or fixed-length interfaces,
the number of inbound transmission units that contained errors preventing
them from being delivered to a higher-layer protocol.
in-unknown-protos For packet-oriented interfaces, the cumulative number of packets that
were received through the interface that were discarded because of an
unknown or unsupported protocol. For character-oriented or fixed-length
interfaces that support protocol multiplexing, the number of transmission
units received through the interface that were discarded because of an
unknown or unsupported protocol. For any interface that does not support
protocol multiplexing, this counter is always 0.