Filter
Top Products
6-164
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface gateway
Table 6-66 describes the fields that appear when you use the
ip
keyword with the
show interface
gateway
command.
Command Output:
Table 6-67 describes the fields that appear when you use the
ip-backup
keyword with the
show
interface gateway
command.
Note This keyword applies to Fibre Channel cards only.
Table 6-66 ip Keyword Output Field Descriptions
Field Description
port Port number, in card#port# format. A port# of 0 represents the gateway port of the
interface card.
address IP address that you assigned to the port.
mask Subnet mask that you assigned to the port.
bcast-addr format IP broadcast address format that the port uses.
reasm max-size Size of the largest IP datagram that this port can receive and reassemble from
incoming fragmented IP datagrams.
type Displays “primary” or “backup” to indicate that the interface card acts as the
primary or backup interface for the IP address that appears in the “address” field.
status Displays “active” or “inactive” to indicate that the card actively services IP
packets addressed to the IP address in the “address” field or does not service
packets to the specified address.
Table 6-67 ip-backup Keyword Output Field Descriptions
Field Description
if-index Numeric identifier, or “interface index,” of the port, in slot#/port# notation.
priority Displays the priority of each backup address.
Table 6-68 statistics Keyword Output Field Descriptions
Field Description
slot-id Chassis slot that contains the gateway that you want to display.
link-events Cumulative number of link events that the gateway has processed.
srp-cmds-outstanding Cumulative number of unresolved SRP commands on the gateway.
srp-cmds-completed Cumulative number of SRP commands that the gateway executed.
srp-errors Cumulative number of SRP errors that the gateway encountered.
srp-initiated-ios Cumulative number of I/O transactions that initiators requested of FC devices
through the gateway.
srp-bytes-read Cumulative number of I/O bytes that the gateway has read.
srp-bytes-written Cumulative number of I/O bytes that the gateway has written.