Filter
Top Products
6-89
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib pm port counter
show ib pm port counter
To display the performance monitoring counters for one or more InfiniBand ports, enter the show ib pm
port counter config subnet-prefix command in User Execute mode or Privileged Execute mode. Use
the following syntax for this version of the command:
show ib pm port counter subnet-prefix prefix [node-guid guid [port-num port]]
Syntax Descriptionx
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Command Output:
Table 6-33 shows the output from this command.
Table 6-33 show ib pm port counter (version 2) Command Output
subnet-prefix Subnet prefix to which the port belongs.
prefix Prefix number such as fe:80:00:00:00:00:00:00
node-guid GUID of the node to which the port belongs.
guid GUID number such as 00:05:ad:00:00:01:0c:19
port-num Port number on the node.
port Port number such as 1
subnet-prefix Subnet prefix to which the port belongs.
node-guid GUID of the node to which the port belongs
port-num Port number on the node
chassis-guid GUID of the chassis to which the port belongs (if available)
slot-num Slot number on the chassis to which the port belongs (if available)
ext-port-num Port number (if available) on the chassis slot to which the port
belongs
data-is-valid If false, re-run the command to obtain valid data
symbol-errors Symbol error counter
link-recovery-errors Link Error Recovery counter
link-downs Link Downed counter
rcv-errors Port Receive Error counter
rcv-remote-phy-errors Port Receive Remote Physical Error counter