Filter
Top Products
6-167
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface ib
show interface ib
To display attributes of InfiniBand ports, enter the
show interface ib
command in User Exec mode or
Privileged Exec mode.
show interface ib
port-selection [
sma
{
node-info
|
port-info
[
detail
]} |
statistics
]
Syntax Description
Defaults See Table 6-69 through Table 6-73.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Without the optional
sma
or
statistics
keywords, the
show interface ib
command displays general
information about the InfiniBand interface port, such as its administrative status, its operational speed
and status, and duplex mode.
Command Output:
Table 6-69 describes the fields in the
show interface ib
command output.
port-selection Port, list of ports, or range of ports that you want to view.
sma (Optional) Displays subnet management agent (SMA) information.
node-info (Optional) Displays node-based SMA information.
port-info (Optional) Displays port-based SMA information
detail (Optional) Displays detailed, port-based SMA information.
statistics (Optional) Displays InfiniBand interface traffic statistics.
Table 6-69 show interface ib Command Field Descriptions
Field Description
port Identifies the InfiniBand interface card and port.
The format is slot#/port#.
name User assigned name. If no name is assigned, the
port name is displayed instead. This field is set by
the
name
command.