Filter
Top Products
6-44
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show diagnostic interface ib
show diagnostic interface ib
To display completed or ongoing diagnostic tests for InfiniBand switch ports, enter the
show
diagnostic interface ib
command in User Exec mode or Privileged Exec mode.
show diagnostic interface ib {port | all}
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Command Output:
Table 6-15 describes the fields in the
show diagnostic interface ib
command.
port Ethernet port, in slot#/port# notation.
all Specifies all Ethernet ports on the Server Switch.
Table 6-15 show diagnostic card Command Field Descriptions
Field Description
test Test that ran or runs on the card.
port InfiniBand port number, in slot#/port# notation.
validation Displays enabled or disabled to indicate validation status.
data-size Size of the test data.
data-pattern Pattern of the test data.
iterations Number of iterations of the test.
source-id Source LID for the test.
target-id Target LID for the test.
action Last action that an administrator performed on the test.
result Result of the last action that an administrator performed on the test.
percentage-completed Percentage of the test that has executed.
result-string Result of the diagnostic test.