Filter
Top Products
6-212
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show version
show version
This command provides the software version, contact information, system up-time, time of last
configuration change, and the last action performed on the Server Switch. To display a general,
high-level description of your Server Switch, enter the
show version
command in User Exec mode or
Privileged Exec mode.
show version
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output:
Table 6-82 describes the fields in the command output.
Table 6-82 Show Version Command Field Descriptions
Field Description
system-version OS version that the Server Switch runs.
contact Displays the contact information that you configure with the
snmp-server
command. See the“snmp-server” section on
page 2-66.
name Displays the device name that you configure with the hostname
command. See the“hostname” section on page 2-41.
location Displays the location information that you configure with the
snmp-server
command. See the “snmp-server” section on
page 2-66.
up-time Amount of time since last boot.
last-change Date and time of last configuration change.
last-config-save Date and time that an administrator last saved the running
configuration.
action Executed action. See the “action” section on page 2-3.