Filter
Top Products
2-65
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
shutdown
Step 4 Enter the
shutdown
command or the
no shutdown
command to disable or enable the port.
The InfiniBand Management port provides Telnet, SSH, and Element Manager access to InfiniBand
hosts that run IPoIB and connect to any of the InfiniBand ports on your Server Switch. With the IB
management port, you can run management applications over IPoIB.
Note You must configure the IP address and gateway of the Infiniband Management port through the Serial
Console terminal. Use the
ip
and
gateway
commands.
Examples The following example enables interface card 12:
SFS-7000P(config-card-12)# no shutdown
The following example enables the interface Management Ethernet port:
SFS-7000P(config-if-mgmt-ethernet)# no shutdown
The following example enables the interface Management IB port:
SFS-7000P360(config-if-mgmt-ib)# no shutdown
The following example sets the admin-status field for ports 1 through 6 on InfiniBand card 15 to up:
SFS-7000P(config-if-ib-15/1-15/6)# no shutdown
Related Commands action
auto-negotiate
card
gateway
ip
link-trap
show card
show fc srp initiator
show interface mgmt-serial
type