Cisco Systems 7000 Plumbing Product User Manual


 
6-201
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show snmp
show snmp
To display the SNMP receivers for link traps on your Server Switch, enter the
show snmp
command in
User Exec mode or Privileged Exec mode.
show snmp
[
user
{
all
| user-name}]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Use this command to verify the SNMP servers that you configure with the
snmp-server
command.
Examples The following example displays the SNMP trap receivers configured on the Server Switch:
SFS-270# show snmp
================================================================================
SNMP Information
================================================================================
contact : support@topspin.com
location : 515 Ellis Street, Mountain View, CA 94043
================================================================================
Trap Receivers
================================================================================
ipaddr version community recv-events
----------------------------------------------------------------------
user (Optional) Displays SNMP information for all users or for one particular
user if you specify that user with the user-name variable.
user-name (Optional) User with the SNMP information that you want to display.