Filter
Top Products
6-156
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface fc
show interface fc
To display the attributes of Fibre Channel ports, enter the
show interface fc
command in User Exec
mode or Privileged Exec mode.
show interface fc
{port-selection |
all
} [
statistics
|
targets
|
virtual-ports
]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
The administrative (admin) status, speed, and connection-type reflect the values you had assigned. The
operational (oper) status, speed, and connection-type reflect the values derived from the physical
hardware and its connections. This situation allows you to verify your configuration settings against the
actual hardware. The admin/oper pairs do not have to match for you to use the card. However, if there is
a mismatch, the operational value is used.
Command Output:
Table 6-60 describes the fields in the
show interface fc
command output.
port-selection Port, list of ports, or range of ports to display.
all Displays all Fibre Channel ports on your Server Switch.
statistics (Optional) Displays traffic statistics for the ports that you specify.
targets (Optional) Displays the targets that the portss that you specify can access.
virtual-ports (Optional) Displays the virtual ports that the FC gateway mapped to the ports
that you specify.
Table 6-60 show interface fc Command Field Descriptions
Field Description
port Fibre Channel gateway port number, in slot#/port# format.
name Administrative port name that you configure with the
name
command.
type Identifies the type of the port. All type identifiers begin with “fc” for
Fibre Channel ports.