Filter
Top Products
6-94
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib pm threshold
show ib pm threshold
To view performance monitoring thresholds, enter the
show ib pm threshold
command in User
Execute mode or Privileged Execute mode.
show ib pm threshold
subnet-prefix
prefix
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output:
:
subnet-prefix Specifies the subnet prefix of the thresholds to view.
prefix Subnet prefix of the thresholds to view.
subnet-prefix Subnet to which the threshold configuration applies.
symbol-errors Threshold for Symbol Error counters.
link-recovery-errors Threshold for Link Recovery Error counters.
link-downs Threshold for Link Downed counters.
rcv-errors Threshold for Port Receive Error counters.
rcv-remote-phy-errors Threshold for Port Receive Remote Physical Error counters.
rcv-switch-relay-errors Threshold for Port Receive Switch Relay Error counters.
xmit-discards Threshold for Port Transmit Discard Error counters.
xmit-constraint-errors Threshold for Port Transmit Constraint Error counters.
rcv-constraint-errors Threshold for Port Receive Constraint Error counters.
local-link-integrity-errors Threshold for Local Link Integrity Error counters.
excessive-buf-overrun-errors Threshold for Excessive Buffer Overrun Error counters
vl15-droppeds Threshold for VL15 Dropped Error counters
xmit-rate Threshold for transmit rate, as a percentage of total port bandwidth
rcv-rate Threshold for receive rate, as a percentage of total port bandwidth