Filter
Top Products
3-22
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 3 Fibre Channel Commands
fc srp-global itl
Examples The following example sets the I/O high mark of the ITL to 32:
SFS-7000P(config)fc srp itl 00:05:ad:00:00:01:29:c5 00:00:00:00:00:00:00:00
21:00:00:04:cf:f6:c2:ab 00:00:00:00:00:00:00:00
io-hi-mark 32
Related Commands show interface fc
show fc srp-global
max-retry
retry SRP global defaults for LUs of random/sequential access
devices.
Default for random devices: 5
Default for sequential devices: 1
This value is applied to LU entries as their default setting
at entry creation time. You can overwrite the value on LU
basis later.
Number of times the same I/O request may be sent to a
logical unit. Increase the value if heavy traffic runs, or
increase the min-io-timeout value. The value, an integer,
must fall between 1 and 100. The retry value defaults to 5.
Enter the
fc srp-global itl
command with this keyword
and the desired max-retry value to set this feature.
min-io-timeout
timeout SRP global defaults for LUs of random/sequential access
devices.
Default for random devices: 10
Default for sequential devices: 60
This value is applied to LU entries as their default setting
at entry creation time. You can overwrite the value on LU
basis later.
Maximum amount of time allowed for I/O traffic to be
accepted by a logical unit. Increase this value (or increase
the max-retry value) if you use a known slow connection.
The value, an integer, must fall between 1 and 1800. The
timeout defaults to 10 seconds.
Table 3-3 Usage Guidelines for fc srp-global itl Command Arguments (continued)
Policy Description