Filter
Top Products
1-3
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 1 Using the CLI
Starting A CLI Session
Note If a user does not have access to particular functionality, that functionality will not appear in the CLI,
on-line help, or any GUI management windows.
The unrestricted (super) administrator assigns these roles. Table 1-2 lists and describes these access
levels.
To configure accounts, see the username command in the “username” section on page 2-80.
Logging In
At the CLI prompt, enter the appropriate username and password to log in as the super user.
Login: super
Password: xxxxx
SFS-7000P>
You are now logged in as an administrator and can view and configure the CLI configuration.
Note Server Switches support up to three concurrent CLI sessions.
Authentication
You can use any of the authentication methods shown in Table 1-3.
Table 1-3 Authentication Methods for Logging In
Table 1-2 Access Levels
Role Description
ib-ro InfiniBand read-only access.
ib-rw InfiniBand read-write access.
ip-ethernet-ro Ethernet read-only access.
ip-ethernet-rw Ethernet read-write access.
fc-ro FibreChannel read-only access.
fc-rw FibreChannel read-write access.
unrestricted-rw Read-write access to all network configuration commands.
Authentication How it Works
local Verifies against the chassis database.
local and then RADIUS Verifies against the chassis database then checks the RADIUS
server.
RADIUS and then local Checks the RADIUS server and then verifies against the chassis
database.