Filter
Top Products
6-61
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show fc srp itl
show fc srp itl
To display all ITLs that run through your Server Switch, enter the
show fc srp itl
command in User
Exec mode or Privileged Exec mode.
show fc srp itl
[guid extension wwpn LUN]
Syntax Description
Defaults Enter the
show
fc srp itl
command with not arguments to display all ITLs on your Server Switch.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user.
Enter this command without arguments to display the ITL information for all connected Fibre Channel
devices. This command displays active and inactive ITLs.
Table 6-23 describes the fields in the
show fc srp itl
command output.
guid (Optional) Global unique identifier (GUID) of the initiator.
extension (Optional) GUID extension of the initiator.
wwpn (Optional) World-wide port name (WWPN) of the target port on the FC
storage device.
LUN (Optional) Logical unit number (LUN) of the FC storage device.
Table 6-23 show fc srp itl Command Field Descriptions
Field Description
guid GUID of the initiator.
extension GUID extension of the initiator.
target-wwpn WWPN of the target port on the FC storage device.
fc-lunid Fibre Channel LUN ID of the storage disk/tape/stripe.
description User-configured description.
srp-lunid Internal SRP LUN ID. This value serves as a SRP-side alias
for a FC LUN ID. By default, the srp-lunid value matches the
LUN variable.
logical-id (raw 64 bytes) Numeric disk LU.
logical-id (formatted display) Alphanumeric disk LU.