Filter
Top Products
3-9
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 3 Fibre Channel Commands
fc srp itl
fc srp itl
To configure an initiator-target-LUN (ITL) group—a fully-configured link between an initiator and
Fibre Channel storage—on your Server Switch, enter the
fc srp itl
command in Global Configuration
mode. To delete an ITL entry or reset the description of an ITL to an empty string, use the
no
form of
this command.
Note For a breakdown of the different actions that you can perform with the
fc srp itl
command, refer to
Table 3-1.
fc srp itl
guid extension wwpn LUN {
description
“
descr
”
|
dynamic-gateway-port-failover
[
default
] |
dynamic-gateway-port-loadbalancing
[
default
] |
dynamic-path-affinity
[
default
] |
gateway-portmask-policy
{
default
|
restricted
{port-selection |
all
}} |
io-hi-mark
mark [
default
] |
lun-policy
{
default
|
restricted
} |
max-retry
retry [
default
]
|
min-io-timeout
timeout [
default
] |
srp-lunid
lunid
logical-id
logical-id}
no fc srp itl
guid extension wwpn LUN {
description
|
dynamic-gateway-port-failover
|
dynamic-gateway-port-loadbalancing
|
dynamic-path-affinity
|
gateway-portmask-policy restricted
port-selection |
io-hi-mark
|
lun-policy
restricted
|
max-retry
|
min-io-timeout
}
Syntax Description guid Global unique identifier (GUID) of the initiator.
extension GUID extension of the initiator.
wwpn World-wide port name (WWPN) of the target port of the FC storage device.
LUN FC LUN ID of the FC storage disk.
description Assigns a text description to the ITL.
descr Alphanumeric description (up to 50 characters) to assign to the
initiator-target-LUN.
dynamic-gateway-
port-failover
The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
default (Optional) Sets an attribute to its global default value.
dynamic-gateway-
port-loadbalancing
The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
dynamic-path-
affinity
The
fc srp itl
command no longer supports this syntax.
Note This syntax appears for legacy purposes. Use the config fc srp lu
command to set this feature.
gateway-portmask-
policy
Defines the port restrictions that apply to the initiator for that ITL.
restricted Denies the initiator access to select ports or LUNs for the ITL. Grants the
initiator access to select ports or LUNs when you use the
no
keyword.
port-selection Port, list of ports, or range of ports that the initiator can or cannot access for
the ITL.