Filter
Top Products
6-32
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show diagnostic
show diagnostic
To display diagnostics, enter the
show diagnostic
command in User Exec mode or Privileged Exec
mode.
show diagnostic
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Examples The following example displays the system diagnostics available:
SFS-270# diagnostic ?
SFS-7000P# show diag ?
card - Show card specific diagnostic test
chassis - Show chassis specific diagnostic test
fan - Show fan specific diagnostic test
fru-error - Show the last hardware error (if any) detected
interface - Show interface specific diagnostic test
post - Show POST status of all FRUs in the system
power-supply - Show power supply specific diagnostic test
rack-locator - Show rack locator specific diagnostic test
Related Commands show diagnostic card
show diagnostic chassis
show diagnostic fan
show diagnostic fru-error
show diagnostic interface ethernet
show diagnostic interface fc
show diagnostic interface ib
show diagnostic post
show diagnostic power-supply
show diagnostic rack-locator