Filter
Top Products
6-149
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface ethernet
Command Output:
Table 6-55 describes the fields in the
show interface ethernet
command output.
Table 6-56 describes the fields in the
ip
keyword output.
Table 6-55 show interface ethernet Command Field Descriptions
Field Description
port Port number, in slot#/port# format.
name Administratively-configured port name.
type Type of port.
desc Name that you assign with the
name
command.
last-change Time of the most recent configuration change that a user made to the port.
mac-address MAC address of the port.
mtu Maximum transmission unit (MTU) of the port, in bytes.
auto-negotiate-supported Displays “yes” if the port supports auto-negotiation.
auto-negotiate Displays “enabled” if you have configured auto-negotiation to run on the
port.
admin-status Administrative status of the port.
oper-status Operational status of the port.
admin-speed Administrative speed that you configured on the port.
oper-speed Operational (actual) speed at which the port runs. Actual speed differs from
admin speed if the port on the other end of the connection cannot support
the speed that you configured.
admin-duplex Administrative duplex type (half or full) that you configured to run on the
port.
oper-duplex Operational (actual) duplex type at which the port runs. Actual duplex type
differs from admin duplex type if the port on the other end of the connection
cannot support the type that you specified.
link-trap Displays “enabled” if you configured the port to send link traps with the
link-trap
command.
action Action (such as flushing the ARP table) that you had the interface perform.
result Status of the action that you had the interface perform.
Table 6-56 ip Keyword Output Field Descriptions
Field Description
port Port number, in card#port# format. A port# of 0 represents the gateway port of the
interface card.
address IP address that you assigned to the port.
mask Subnet mask that you assigned to the port.
bcast-addr format IP broadcast address format that the port uses.