Filter
Top Products
2-76
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
trace
trace
To track internal Server Switch program modules that specific interface cards call, enter the
trace
command in Global Configuration mode.
Note Use this command only under the direction of support personnel for program debug purposes.
trace app
app
module
mod
level
{
no-display
|
very-terse
|
terse
|
verbose
|
very-verbose
|
scream
}
flowmask
val [
card
slot]
Syntax Description
Defaults This command has no default settings.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-write user.
Use this command to debug your system.
app Identifies an internal application to trace.
module Identifies a program module to trace within the specified application.
level Specifies the verbosity level of the
trace
command output.
flowmask Masks modules that you do not want to display.
card (Optional) Identifies the card to trace.
no-display Disables tracing when you also set the val variable to 0x00.
very-terse Contact technical support for details.
terse Contact technical support for details.
verbose Contact technical support for details.
very-verbose Contact technical support for details.
scream Contact technical support for details.
app Integer that indicates the internal application to trace.
mod Program module within the application.
val Decimal or hexadecimal value of modules to mask. A value of 0xFFFFFFFF
masks all modules. A value of 0x00 displays all modules.
slot (Optional) Slot number of the card to trace.