Cisco Systems 7000 Plumbing Product User Manual


 
6-42
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show diagnostic interface fc
show diagnostic interface fc
To display completed or ongoing diagnostic tests for Fibre Channel gateway ports, enter the
show
diagnostic interface fc
command in User Exec mode or Privileged Exec mode.
show diagnostic interface fc {port | all}
Syntax Description
Defaults This command has no default settings.
Command Modes: User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
Command Output:
Table 6-14 describes the fields in the
show diagnostic interface fc
command.
port Ethernet port, in slot#/port# notation.
all Specifies all Ethernet ports on the Server Switch.
Table 6-14 show diagnostic card Command Field Descriptions
Field Description
test Test that ran or runs on the card.
port Fibre Channel port number, in slot#/port# notation.
validation Displays enabled or disabled to indicate validation status.
data-size Size of the test data.
data-pattern Pattern of the test data.
iterations Number of iterations of the test.
source-id Source WWPN for the test.
target-id Target WWPN for the test.
action Last action that an administrator performed on the test.
result Result of the last action that an administrator performed on the test.
percentage-completed Percentage of the test that has executed.
result-string Result of the diagnostic test.