Cisco Systems 7000 Plumbing Product User Manual


 
3-19
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 3 Fibre Channel Commands
fc srp-global itl
fc srp-global itl
To configure the default attributes that your Server Switch assigns to all new ITLs, enter the
fc
srp-global itl
command in Global Configuration mode. To configure any attribute to an empty string
or disable an attribute, use the
no
form of this command.
fc srp-global itl
[
sequential
]
{
dynamic-gateway-port-failover
|
dynamic-gateway-port-loadbalancing
|
dynamic-path-affinity
|
io-hi-mark
mark |
max-retry
retry |
min-io-timeout
timeout}
no fc srp-global itl
[
sequential
]
{
dynamic-gateway-port-failover
|
dynamic-gateway-port-loadbalancing
|
dynamic-path-affinity
|
io-hi-mark
|
max-retry
|
min-io-timeout
}
Syntax Description
Defaults By default, the
fc srp-global itl
command configures ITLs for random (non-sequential) targets. For
additional default values, see Table 3-3 on page 3-20.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user or Fibre Channel read-write user.
sequential (Optional) Configures SRP global defaults for ITLs of sequential access
devices.
dynamic-gateway-port
-failover
The
fc srp-global itl
command no longer supports this syntax. This syntax
appears for legacy purposes.
dynamic-gateway-port
-loadbalancing
The
fc srp-global itl
command no longer supports this syntax. This syntax
appears for legacy purposes.
dynamic-path-affinity The
fc srp-global itl
command no longer supports this syntax. This syntax
appears for legacy purposes.
io-hi-mark Assigns the maximum number of I/O requests that the initiator can send to
the storage device.
mark Maximum number of requests that the initiator can send to the storage
device.
max-retry Assigns the maximum number of consecutive, failed attempts to pass traffic
to a LUN that the initiator makes before it identifies the LUN as inaccessible.
retry Number of retries before an initiator recognizes a LUN as inaccessible.
min-io-timeout Configures the maximum amount of time during which the storage device
can accept I/O.
timeout Maximum amount of time during which a storage device can accept I/O.