Filter
Top Products
6-195
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show redundancy-group
show redundancy-group
To display redundancy group information, enter the
show redundancy-group
command in User Exec
mode or Privileged Exec mode.
show redundancy-group
[rlb-id]
Syntax Description
Defaults This command displays all redundancy groups by default.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-only user.
Use this command to view redundancy groups and attributes of redundancy groups.
Command Output:
Table 6-79 describes the fields in the command output.
rlb-id (Optional) Number of the redundancy group that you want to view.
Table 6-79 show redundancy-group Command Field Descriptions
Field Description
rlb-id Redundancy group ID.
name Redundancy group name.
group-p_key Partition key of the group.
load-balancing Displays “enabled” if load balancing runs; otherwise, it displays
disabled.
broadcast-forwarding Displays true if broadcast forwarding is enabled; otherwise, it displays
false.
multicast Displays true if multicast forwarding is enabled; otherwise, it displays
false.
num-members Number of members in the redundancy group.
new-member-force-reelection Displays true if the group is configured to reelect a new primary when
a new member joins; otherwise, it displays false.