Cisco Systems 7000 Plumbing Product User Manual


 
6-187
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ip http server secure
show ip http server secure
To view the HTTPS configuration on your Server Switch, enter the
show ip http secure server
command in User Exec mode or Privileged Exec mode.
show ip http secure server
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Ethernet read-only user.
Use this command to determine if HTTPS actively runs on your Server Switch and to determine the
HTTPS port number that it uses.
Command Output:
Table 6-77 describes the fields in the command output.
Examples The following example displays the HTTPS configuration on the Server Switch:
SFS-270# show ip http server secure
================================================================================
IP HTTP Secure Info
================================================================================
secure-server : enabled
secure-port : 443
secure-cert-common-name : useMgmtEnetIpAddr
Table 6-77 show ip http Command Output Field Descriptions
Field Description
secure-server Displays “enabled” if you have activated the server with the
ip http
server
command. Displays “disabled” if you have deactivated the server
with the
no ip http server
command.
secure-port Displays the HTTP port number that the HTTP server uses.
secure-cert-common-name Certificate name of the secure server.