Filter
Top Products
CHAPTER
7-215
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
7
Diagnostic Commands
This chapter documents the following commands:
• diagnostic, page 7-217
• data-pattern, page 7-219
• data-size, page 7-220
• iterations, page 7-221
• source-wwpn, page 7-222
• start, page 7-223
• stop, page 7-224
• target-wwpn, page 7-225
• test, page 7-226
• validate, page 7-227
Running Diagnostic Tests
To perform a diagnostic test, follow these high-level steps:
Step 1 Enter the appropriate configuration submode for the port or card that you want to test.
Step 2 Configure the properties of the test:
• data-pattern
• data-size
• iterations
• source-wwpn (Fibre Channel only)
• target-wwpn (Fibre Channel only)
Step 3 Configure the type of test:
• internal-loopback
• external-loopback
• echo
• self-test