Filter
Top Products
6-184
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ip
The example below shows the local Ethernet routes for the system chassis. Local routes are
automatically generated whenever you assign an IP address to a system card or port. The codes shown
in the proto column are explained in the output header. A next-hop value of 0.0.0.0 always indicates a
local route.
SFS-7000P# show ip route
============================================================================
IP Routes
============================================================================
Protocol Codes: OT - other L - local NM - netmgmt IC - icmp
E - egp G - ggp H - hello R - rip IS - ISIS ES - ES_IS,
CI - ciscoIgrp BS - bbnSpfIgp O - OSPF B - BGP ID - IDPR
dest mask next-hop port type proto metric
----------------------------------------------------------------------------
10.10.0.3 255.255.255.0 192.168.1.0 4/1 remote NM 0
192.168.1.0 255.255.255.0 0.0.0.0 4/1 local L 0
192.168.2.0 255.255.255.0 0.0.0.0 4/0 local L 0
192.168.3.0 255.255.255.0 0.0.0.0 4/2 local L 0
SFS-7000P#
Related Commands ip