Filter
Top Products
6-52
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show fan
show fan
To display the status of the fans in your Server Switch, enter the
show fan
command in User Exec mode
or Privileged Exec mode.
show fan
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012
Privilege Level:
General read-only user.
For the health of your Server Switch, both fans should be operating while your Server Switch runs. If
the operational status of a fan appears as "down," contact customer support for a fan module
replacement.
Command Output:
Table 6-19 describes the fields in the
show fan
command output.
Table 6-19 show fan Command Field Descriptions
field description
fan Fan number. Fan 1 resides on the left-side as you are facing the front of the
chassis. Fan 2 resides on the right-side of the chassis.
oper status Operational status of the fan. The value appears as unknown, up, down, or
failure. An up value indicates the fan functions correctly.
speed (%) Speed of the fan as a percentage of the maximum speed of the fan.
product serial number Factory-assigned product serial-number.
pca serial-number Printed Circuit-Assembly (PCA) serial-number.
pca number Printed Circuit-Assembly (PCA) assembly-number.
fru number Field-replaceable unit (FRU) number.