Filter
Top Products
6-4
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show arp ethernet
show arp ethernet
To display entries in the Ethernet ARP routing table, enter the
show arp ethernet
command in User
Exec mode or Privileged Exec mode.
show arp
ethernet
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Ethernet read-only user.
Your Server Switch dynamically creates ARP connections on an as-needed basis and removes ARP
entries from ARP routing tables when connections drop.
Command Output:
Table 6-1 describes the fields in the
show arp ethernet
command output.
Examples The following example displays the entries in the Ethernet ARP routing table of the Server Switch:
SFS-7000P# show arp ethernet
===============================================================
ARP Information
===============================================================
port physical-address net-address type
----------------------------------------------------------------------------
4/1 00:05:ad:00:10:41 20.45.0.1 static
Table 6-1 show arp ethernet Command Field Descriptions
Field Description
port Port (in slot#/port# format) on your Server Switch to which the host connects.
physical-address MAC address of the host.
net-address IP address of the host.
type Type of route between the host and your Server Switch, either static or dynamic.