Filter
Top Products
6-88
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib pm port counter config
show ib pm port counter config
To display the port counter configuration whether access to port counters is either enabled or disabled,
enter the show ib pm port counter config subnet-prefix command in User Execute mode or Privileged
Execute mode. Use the following syntax for this version of the command:
show ib pm port counter config subnet-prefix prefix
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Command Output Description:
Examples The following example shows the configuration of the performance monitoring port counter:
SFS-120# show ib pm port counter config subnet-prefix fe:80:00:00:00:00:00:00
================================================================================
IB PM Port Counter Configuration
================================================================================
subnet-prefix : fe:80:00:00:00:00:00:00
state : enabled
config Port counter configuration.
subnet-prefix Specifies the subnet prefix of the counters to view.
prefix Subnet prefix of the counters to view.
subnet-prefix Subnet to which the port counter configuration applies.
state State of port counter access. If 'enabled', then access to port counters is enabled.