Filter
Top Products
6-113
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib sm partition
show ib sm partition
To display the partitions that the subnet manager on your Server Switch manages, enter the
show ib sm partition
command in User Exec mode or Privileged Exec mode.
show ib sm partition [[node-guid
guid
port-num
num
]|[subnet-prefix
val
]]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
A single partition can have members that have full-membership, as well as members that have limited
membership.
See the Cisco SFS 7000 Series Product Family Element Manager User Guide for detailed information
about partitions.
Command Output:
In the output, ff:ff refers to the default partition, which cannot be altered. Members of partitions are
identified by their Node GUID and port-number, as displayed below.
Table 6-40 describes the fields in the show ib sm partition command output.
Field Description
node-guid
GUID of the node in the partition.
guid GUID value, such as 00:05:ad:00:00:00:02:40
.
port-num
Port on the node that belongs to the partition.
num Port number value, such as zero.
subnet-prefix
Subnet prefix of the subnet with the partitions that you want to view.
val Subnet-prefix value such as fe:80:00:00:00:00:00:00
.
Table 6-40 show ib sm partition Command Field Descriptions
Field Description
subnet-prefix Subnet prefix of the subnet with the partitions that you want to view.
p_key Partition key of the partition with the members the display prints below.
node-guid GUID of the node in the partition.