Filter
Top Products
6-54
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show fc srp initiator
show fc srp initiator
To display the attributes of initiators that you have configured on your Server Switch, enter the
show fc srp initiator
command in User Exec mode or Privileged Exec mode.
show fc srp initiator
[guid extension]
Syntax Description
Defaults Enter the
show fc srp
initiator
command with no arguments to display all initiators.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
This command displays active and inactive initiators.
Enter this command without any arguments to display the initiator information for all configured SRP
initiators. If you specify a GUID, you must also specify the extension.
Note Initiators do not need to connect to the Server Switch to appear in the show output. As long as you
configured them, they appear in the command output.
Command Output:
Table 6-20 describes the fields in the
show fan
command output.
guid (optional) GUID of the initiator to view.
extension (optional) GUID extension of the initiator to view.
Table 6-20 show fc srp initiator Command Field Descriptions
Field Description
guid GUID of the initiator.
extension GUID extension of the initiator.
description User-assigned ASCII description of the initiator.
wwnn World-wide node name (WWNN) of the initiator.
credit Indicates the amount of traffic that the initiator can accept.
active-ports IB ports on your Server Switch through which the initiator passes traffic.
pkeys Partition keys of the initiator.