Filter
Top Products
6-115
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib sm port
show ib sm port
Use this command to verify that all ports in your fabric came up when the subnet manager initialized
them. To display all InfiniBand ports on the fabric, the nodes to which the ports belong, the capabilities
of the ports, and the link statistics of the ports, enter the
show ib sm port
command in User Exec mode
or Privileged Exec mode.
show ib sm port subnet-prefix
prefix | all [
node-guid
guid] [
summary
]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Port information may be reported for all the ports on a specific subnet or all the ports comprising a
specific node. The output may also be displayed in summary form.
Command Output:
Table 6-41 describes the fields in the
show ib sm port
command output.
subnet-prefix Specifies the subnet prefix of the subnet manager that manages the ports that
you want to view.
prefix Subnet prefix of the subnet manager that manages the ports that you want to
view.
all Display all subnet management ports in the fabric.
node-guid (Optional) Specifies the GUID of an individual node with the ports that you
want to view.
guid (Optional) GUID of an individual node with the ports that you want to view.
summary (Optional) Displays abridged command output.
Table 6-41 show ib sm port Command Field Descriptions
Field Description
subnet-prefix 64-bit value that identifies the InfiniBand subnet to which this port belongs.
node-guid 64-bit GUID of the node to which this port belongs.
if-index Port number (integer) on the node (host).