Filter
Top Products
6-163
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface gateway
Command Output:
Table 6-64 describes the fields in the
show interface gateway
command output.
Table 6-65 describes the fields that appear when you use the
fc srp initiator-target
argument with the
show interface gateway
command.
Table 6-64 show interface gateway Command Field Descriptions
Field Description
gateway Number of the slot in which the gateway resides.
name Administrative name that you configure with the
name
command.
type Type of interface card, either Ethernet or Fibre Channel.
desc Description of the port, in slot#/port# format. The port identifier appears as zero (0)
to indicate an internal port. The number in parentheses serves as the SNMP identifier.
last-change Time of the most recent configuration change that a user made to the port.
mtu Maximum transmission unit (MTU) of the internal gateway port.
admin-status Administrative status of the gateway that you configure with the
shutdown
command.
oper-status Actual status of the gateway.
Table 6-65 fc srp initiator-target Keyword Output Field Descriptions
Field Description
wwpn World-wide port name (WWPN) of the target that the initiator can access.
wwnn Wold-wide node name (WWNN) of the target that the initiator can access.
description Description of the target.
ioc-guid GUID of the IOC assigned to the target.
service-name Service that the target runs.
protocol-ids Lists the protocols that the target supports.
fc-address Fibre Channel protocol address of the target.
mtu Maximum transmission unit (MTU) of the target.
connection-type Type of connection between the storage and the InfiniBand host. The field will
always display nl-port, because all storage-to-IB host connections occur over a
virtual port, or NL_Port.
physical-access Port or ports through which the target connects to the initiator.