Cisco Systems 7000 Plumbing Product User Manual


 
6-118
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib sm port
VL-arb-high-cap Highest arbitration value allowed by the arbiter in determining the next
packet in a set of packets to send across the link. Used with the virtual-lane
arbitration table and specified as a VL/Weight pair. See section 14.2.5.9,
VL Arbitration Table, InfiniBand Architecture®, Vol. 1, Release 1.1, for
more information.
VL-arb-low-cap Lowest arbitration value allowed by the arbiter in determining the next
packet in a set of packets to send across the link. Used with the virtual-lane
arbitration table and specified as a VL/Weight pair. See section 14.2.5.9,
VL Arbitration Table, InfiniBand Architecture®, Vol. 1, Release 1.1, for
more information.
mtu-cap Used in conjunction with neighbor-mtu to determine the maximum
transmission size supported on this port. The lesser of mtu-cap and
neighbor-mtu determines the actual MTU used. The value appears as 256,
512, 1024, 2048, or 4096.
VL-stall-count Number of sequentially dropped packets at which the port enters a
VLStalled state. The virtual lane exits the VLStalled state (8 * HLL) units
after entering it. See section 18.2.5.4, Transmitter Queuing, InfiniBand
Architecture®, Vol. 1, Release 1.1, for a description of HLL.
HOQ-life Maximum duration allowed to packets at the head of a virtual-lane queue.
Used with VL-stall-count to determine the outgoing packets to discard.
oper-VL Administrative limit for the number of virtual lanes allowed to the link. Do
not set this above the VL-cap value. The value appears as vl0, vl0-Vl1,
vl0-Vl3, vl0-Vl7, or vl0-Vl14.
in-part-enforce Boolean value that indicates whether or not to support optional partition
enforcement for the packets that were received by this port. No default
value applies.
out-part-enforce Boolean value that indicates whether or not to support optional partition
enforcement for the packets transmitted by this port. No default value
applies.
in-filter-raw-pkt-enforce Boolean value that indicates whether or not to support optional raw packet
enforcement for the raw packets that were received by this port. No default
value applies.
out-filter-raw-pkt-enforce Boolean value that indicates whether or not to support optional raw packet
enforcement for the raw packets transmitted by this port. No default value
applies.
mkey-violation Number of subnet management packets (SMPs) that have been received on
this port with invalid M_Keys since initial power up or the last reset. See
section 14.2.4, Management Key, InfiniBand Architecture®, Vol. 1, Release
1.1, for more information.
pkey-violation Number of subnet management packets that have been received on this port
with invalid P_Keys since initial power up or the last reset. See section
9.2.7, partition key (P_KEY), InfiniBand Architecture®, Vol. 1, Release
1.1, for more information.
Table 6-41 show ib sm port Command Field Descriptions (continued)
Field Description