Filter
Top Products
6-14
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show bridge-group
show bridge-group
To display the attributes of bridge groups, enter the
show bridge-group
command in User Exec mode
or Privileged Exec mode.
show bridge-group
[bridge-groupID#]
Syntax Description
Defaults Without an argument, the
show bridge-group
command shows all bridge groups.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines:
Privilege Level:
General read-only user.
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Command Output:
Table 6-6 describes the fields in the
show bridge-group
command output.
bridge-groupID# (Optional) Integer value that represents a bridge group. Use the bridge-group
ID number to view the attributes of one specific bridge group.
Table 6-6 show bridge-group Command Field Descriptions
Field Description
bridge-group-id Displays the integer-value identifier of the bridge group that the
administrator assigned with the
bridge-group
command.
bridge-group-name Displays the ASCII text string identifier that the administrator assigned
with the
bridge-group
command.
eth-bridge-port Displays the trunk that the bridge group uses to connect to the Ethernet
switch.
ib-bridge-port Displays the internal gateway slot#/port# of the bridge-group.
broadcast-forwarding Displays true if you enable broadcast-forwarding. Displays false if you
disable broadcast forwarding.
broadcast-forwarding-mode
loop-protection-method Displays one if you enable ARP Packet Painting. Displays ? if you disable
ARP Packet Painting. See the Ethernet Gateway User Guide for more
information.
multicast Displays true if the bridge group belongs to a multicast group. Displays
false if the bridge group does not belong to a multicast group.