Filter
Top Products
6-66
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show fc srp lu
show fc srp lu
To display attributes of logical units, enter the
show fc srp lu
command in User Exec mode or
Privileged Exec mode.
show fc srp lu
[logical-id]
Syntax Description
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
Table 6-25 describes the fields in the
show fc srp lu
command output.
logical-id (Optional) LU identifier, in 64-byte, hexadecimal format. Be sure to omit all
colons.
Table 6-25 show fc srp lu Command Field Descriptions
Field Description
logical-id (formatted display) ID of the LUN.
description User-defined LU description.
device-category Displays “random” or “sequential” to identify the type of
LUN.
targets Displays the WWPN of the target in which the LUN resides.
hi-mark The maximum number of outstanding requests from the
initiator to the storage that the ITL can maintain.
max-retry Displays the number of failed communication attempts that
must occur before the LUN identifies the initiator as
inaccessible.
min-io-timeout Maximum amount of time that elapses before a SRP request
times out.
dynamic-path-affinity Displays true if you enable the feature and false if you disable
the feature.
dynamic-gateway-port-loadbalancing Displays true if you enable the feature and false if you disable
the feature.