Filter
Top Products
6-103
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib sm mft
show ib sm mft
Use this command to display the following:
• Multicast forwarding information based on the block number.
• Multicast entries that are currently in use by a subnet manager.
To display multicast forwarding information based on the LID block number, enter the
show ib sm mft
command in User Exec mode or Privileged Exec mode. The command reports only the entries that are
currently in use by a subnet manager.
show ib sm mft
subnet-prefix
{prefix |
all
}[lid lid | node-guide guid]
Syntax Description
Defaults This command has no default settings.
Command Modes User Exec mode, Privileged Exec mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
subnet-prefix Specifies the subnet prefix of the subnet manager with the status that you want to
view.
prefix Displays the multicast forwarding table info for a specific subnet or all the subnets
in the fabric.
all Currently, “all” is just an alias to the subnet value of the local subnet manager.
lid Local ID of the subnet.
lid Local ID number.
node-guide Guide of the switch node in the subnet with the FDB to be accessed.
guid Guide number.