Filter
Top Products
6-79
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show ib dm iou
show ib dm iou
To display the Device Manager input/output unit (IOU) configuration, enter the
show ib dm iou
command in User Exec mode or Privileged Exec mode.
show ib dm iou
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012
Privilege Level:
General read-only user.
Table 6-31 describes the fields in the
show ib dm
command output.
Examples The following example displays the DM I/O details for the Server Switch:
SFS-7000P> show ib dm iou
================================================================================
IB Device Manager I/O Unit
================================================================================
change-id: 2352
max-controllers: 1
diag-device-id: 0
option-rom: absent
controllers: slot-1 IOC present
Table 6-31 show ib dm Command Output Fields
Field Description
change-id Cumulative number of changes to the controller list since the device last
booted.
max-controllers Maximum number of controllers that your device can support.
diag-device-id Displays “1” if diagnostics can provide IOC details; otherwise, displays “0.”
option-rom Indicates the presence or absence of Option ROM.
controllers Lists the virtual slots on your Server Switch that run IOC controllers.
Note All references to “slot” in this field see virtual slots, not physical slots
on the Server Switch.