Filter
Top Products
6-159
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 6 Show Commands
show interface fc
Table 6-62 describes the fields in the
targets
keyword output.
out-octets Cumulative number of octets transmitted out of the interface, including
framing characters.
out-ucast-pkts Cumulative number of packets that higher-level protocols requested be
transmitted and that were not addressed to a multicast or broadcast address
at this sub-layer, including those that were discarded or not sent.
out-multicast-pkts Cumulative number of packets that higher-level protocols requested be
transmitted and that were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent. For a MAC
layer protocol, this includes both Group and Functional addresses.
out-broadcast-pkts Cumulative number of packets that higher-level protocols requested to be
transmitted and that were addressed to a broadcast address at this
sub-layer, including those that were discarded or not sent.
out-discards Cumulative number of outbound packets that were chosen to be discarded
even though no errors had been detected to prevent their being transmitted.
One possible reason for discarding such a packet could be to free-up buffer
space.
out-errors For packet-oriented interfaces, the cumulative number of outbound
packets that could not be transmitted because of errors. For
character-oriented or fixed-length interfaces, the number of outbound
transmission units that could not be transmitted because of errors.
link-events Cumulative number of link events processed by the Fibre Channel
interface port.
fcp-cmds-outstanding Cumulative number of FCP commands outstanding on the Fibre Channel
interface port.
fcp-cmds-completed Cumulative number of FCP commands completed on the Fibre Channel
interface port.
fcp-errors Cumulative number of FCP errors encountered on the Fibre Channel
interface port.
fc-initiator-IO Cumulative number of transactions between the Fibre Channel initiator
and this port.
Table 6-61 statistics Keyword Output Field Descriptions (continued)
Field Description
Table 6-62 targets Keyword Output Field Descriptions
Field Description
wwpn World-wide port name (WWPN) of the target.
wwnn World-wide node name (WWNN) of the target.
description Dynamically-assigned or administratively-assigned description of the target. Enter
the
fc srp target
command with the
description
keyword to configure this field.
ioc-guid I/O controller (IOC) GUID of the FC gateway that accesses the target.
service-name Name of the service that the target runs.