Filter
Top Products
2-48
Cisco SFS 7000 Series Product Family Command Reference Guide
OL-9163-02
Chapter 2 Administrative Commands
logging
logging
To identify a remote server as a server that accepts log messages from your Server Switch, enter the
logging
command in Global Configuration mode. To undo logging settings, use the
no
form of this
command.
[ No] logging-server one <ip-address>
[ No] logging-server two <ip-address>
Syntax Description
Defaults This command has no default settings.
Command Modes Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
All users.
Warnings, errors, notifications, and alerts occur once the system boots successfully. The
logging
command sends these occurrences to the remote server that you specify.
Examples The following example configures the Server Switch to send log messages to the host with an IP address
of 10.3.0.60:
SFS-7000P(config)# logging-server one 10.3.0.60
Related Commands show logging
terminal
snmp-server
show snmp
ip-address IP address of the remote syslog server.