Filter
Top Products
4
SETTINGS AND PROCEDURE TO OPERATION
4.2 Settings and Procedure to Operation
4
- 5
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
*1 As necessary, execute the self-diagnostic test for checking the communication function and
hardware of the MES interface module.
Section 4.6 Self-diagnostics Test
*2 For a battery, refer to the following:
Section 4.8 Battery
Section 4.9 Operation without Mounting Battery
Section 4.10 Removing Battery for Storage
*3 If an account is forgotten and therefore connection to the MES interface module cannot be made,
eject the CompactFlash card from the MES interface module, then follow the procedure in the
figure above
*3
and subsequent procedure.
For details on how to eject the CompactFlash card, refer to the following.
Section 4.7.2 Installation/removing the CompactFlash card
*4 For details on how to insert/eject the CompactFlash card and precautions for use, refer to the
following.
Section 4.7 CompactFlash Card
*5 When the test has been completed abnormally, check the following and execute the PING
command again.
• Network settings for the MES interface module or configuration computer
• Connection status of the MES interface module or configuration computer