Filter
Top Products
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.12 Online
7.12.2 Writing the MES interface function settings
7
- 125
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
(1) Setting data are refreshed to the MES interface module when any of the
following operations are performed.
• Perform [Update settings]
Section 7.13.2 (3)
• Power OFF and then ON
• Reset the programmable controller CPU
(2) The [System setting] data are not updated by [Update settings].
They are refreshed to the MES interface module when the power is turned
OFF and then ON, or when the programmable controller CPU is reset.
(3) After writing the data, performing any of the following operations clears all the
DB buffer.
• Perform [Update settings]
• Power OFF and then ON
• Reset the programmable controller CPU
Figure 7.97 Confirmation dialog box displayed after writing [System setting] changes