Filter
Top Products
8
DB CONNECTION SERVICE AND SETTING TOOL
8.5 Setting Items of DB Connection Service Setting Tool
8
- 16
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
8.5 Setting Items of DB Connection Service Setting Tool
The following shows how to change the DB Connection Service settings.
1 Set the following items, then click the button.
2 After updating the settings, check for an error by selecting [Administrative Tools] -
[Event Viewer] in Windows
®
.
3 Section 10.1 Error Codes
(1) Change the DB Connection Service settings when a job using the DB
Connection Service is not operating.
The status is as follows:
• The programmable controller is powered OFF.
• The MES interface function operation is stopped with [Online] - [Remote
operation] of [MES interface function configuration tool].
Section 7.13.2 Manipulating the operation status of the MES
interface function
(2) When reflecting the settings with a job using DB Connection Service is
running, the execution of the connected job is canceled and a communication
error occurs.
Also, for a job to which [Enable DB buffering] is selected, any SQL text is
buffered in the DB buffer.
Reflect settings