Filter
Top Products
7
- 114
7.11 Job Setting - Actions
7.11.2 Setting items in Communication action (Select/Update/Insert/MultiSelect/Delete)
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(10)Multi select setting
A click on the button displays the [Multi select setting] dialog box.
Complete the setting, referring to the following explanation.
After completing the setting, click the button.
(a) Specify the maximum number of acquiring records
If the [Specify the maximum number of acquiring records] checkbox is checked,
records of up to the specified number are acquired.
The records are acquired in the sorting order set in [Select sort settings].
When selecting this, set a tag for which a value is specified.
1) Tab/Type
Select a tag for which a value is specified.
Note that tags with [Array setting] are not selectable.
2) Component
Select or directly enter a component or a constant value to be specified.
An error occurs if the specified tag component value is 0 or less.
For error codes, refer to the following.
Section 10.2.1 Error codes for the MES interface module
Figure 7.89 [Multi select setting] dialog box
Table 7.79 Values available for Component
Item Values available for Component
[Number] Within the range of 1 to 40000
Device tag
Single-precision type, Double-precision type, 16-bit BCD type, or 32-bit
BCD type tag component
Multi select setting
OK