Filter
Top Products
App
- 4
Appendix 1 Functions Added in MES Interface Module and MX MESInterface
Appendix 1.2 Operations of former versions
APPENDICES
Appendix 1.2 Operations of former versions
This section describes the operations of the former MES interface module and MX MES
Interface versions.
(1) DB buffering function
(a) For a MES interface module whose first five digits of serial No. is "09101" or
earlier
The processing content of automatic resend while DB buffering is different.
Processing content
For automatic resend processing of MES interface module whose first five digits
of serial No. is "09102" or later, refer to the following:
• Overview of automatic resend processing Section 6.1.10 (7)
• Operation while data is being stored to DB buffer Section 6.1.10 (8) (a)
(b) For MX MESInterface version 1.09K or earlier
Due to upgrade the software version, the display contents on the DB buffering
settings of the Job settings will be changed as shown in the following table.
The operation of the system settings (Operation of recovery from network
disconnection) added to version 1.10L or later is the same as the default settings
of version 1.09K or earlier.
1 When the job data cannot be sent to the database, it is stored to DB buffer
after the detection of a timeout.
2 Data is sent to database each time when the job is started up.
When the data cannot be sent to the database, it is stored to DB buffer
after the detection of a timeout.
3 The content of DB buffer is resent after recovery.
Figure App.1 When auto-resend is set for a job
Table App.1 DB buffering settings
version 1.09K or earlier version 1.10L or later
Job settings Job settings
System settings
(Operation of recovery from network disconnection)
Select
"Automatically resend at
time of restoration"
Using
the Automatically
resend buffer
Automatically resend buffer
"Immediate sending (Do not add to the buffered data)"
Clear
"Automatically resend at
time of restoration"
Using
the Manually
resend buffer
Manually resend buffer
"Adding to the buffered data"
After sending,
timeout detected
Stored to DB
buffer
Communication
recovery
Job startup Job startup Job startup
After sending,
timeout detected
Stored to DB
buffer
Send
Resend DB buffer
data automatically