Filter
Top Products
7
- 122
7.11 Job Setting - Actions
7.11.4 Setting items in Operation action
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(3) Setting example of [Operation action]
The following is a case in which correction power is calculated using a correction
voltage and it is assigned to a tag component (Process 1. Correction power).
The tag component value (Process 1. Correction power) obtained from the following
[Operation action] is:
(Process 1. Voltage
× 100 + 50) × Current
Table 7.83 Variable types and values available for [Component]
Variable type Values (variable names) that can be entered in [Component]
[Variable]
Up to 16 characters
For the characters that can be used for variables, refer to the following.
Appendix 2.2 Characters that can be used for item names,
component names, variable names, etc. in the product
Figure 7.94 Setting example of [Operation action]