Mitsubishi Electronics QJ7MES96 Thermostat User Manual


 
APPENDICES
Appendix 3 Setting Information File Format (CSV File Format)
Appendix 3.9 COMPONENT.CSV
App
- 27
9
XML MESSAGE
FORMAT
10
TROUBLESHOOTINGAPPENDICESINDEX
(3) Setting item
*1 For characters can be used for component names, refer to the following:
Appendix 2.2 Characters that can be used for item names, component names, variable names,
etc. in the product
*2 If the same component name already exists in the same item (Tag), the existing name is
overwritten.
Also, if the same component name is set multiple times in the same item (Tag), the setting of the
label with the higher number is overwritten.
*3 Specify [Access target CPU settings] No. that is set in the CPU.CSV label.
Specifying [Access target CPU settings] No. that is not set in CPU.CSV causes an error.
*4 Setting a device that does not exist causes an error.
Setting a device that does not match the data type causes an error.
If the total of device points is set greater than 96 at [High-speed sampling] selection, this causes
an error.
Table App.28 Setting item
Item Description Setting value
COMPNAME
Component name *
1
*
2
Up to 16 characters
CPUNO
CPU name *
3
1 to 64 (However, only one high-speed
sampling tag allowed.)
DATATYPE Data type
Single precision [SINGLE]
Double precision [DOUBLE]
Floating point [REAL]
Bit [BIT]
Character string (The number shows
the number of characters.)
[STRING1] to [STRING32]
16-bit BCD [16BCD]
32-bit BCD [32BCD]
DEVICE
Head device *
4
Head device
FORMAT (Fixed value) [DEC]
DECIMAL PLACES (Fixed value) [0]
OPERATOR (Fixed value) [NONE]
OPERAND (Fixed value) (Blank)
STATISTICS
Perform
statistical
processing
When enabled [ENABLE]
When disabled [DISABLE]
STATTYPE Statistical type
When [DISABLE] is selected
with STATISTICS
(Blank)
When [ENABLE]
is selected with
STATISTICS
Average [AVERAGE]
Maximum [MAXIMUM]
Minimum [MINIMUM]
Moving average [MOVINGAVERAGE]
Moving maximum [MOVINGMAXIMUM]
Moving minimum [MOVINGMINIMUM]
STATSIZE No. of samples
When [DISABLE] is selected
with STATISTICS
(Blank)
When [ENABLE]
is selected with
STATISTICS
Average (Blank)
Maximum (Blank)
Minimum (Blank)
Moving average 2 to 20
Moving maximum 2 to 20
Moving minimum 2 to 20
2
3
4
5
6
7
8