Filter
Top Products
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
7.8 Device Tag Setting
7.8.3 Setting items in Component setting
7
- 51
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
SETTINGS AND
PROCEDURE TO
OPERATION
5
INSTALLATION AND
UNINSTALLATION
6
FUNCTIONS
7
MES INTERFACE
FUNCTION
CONFIGURATION TOOL
8
DB CONNECTION
SERVICE AND
SETTING TOOL
(7) n (Array No.)
When [Array setting] is set, the device range of array No.n, is displayed in [Device [n]]
of [Component List].
To change the [Device [n]] display, use the following methods.
• Enter a value in the box.
• Change the value with the , , , or button.
(8) Array block size
When [block] is selected in [Array setting], [array block size] setting is available.
Usually, the block size need not be changed because the it is automatically adjusted
to avoid duplication of components.
Change [array block size] when:
• Setting a desired number for the start device No. of each block.
• Adding any component in the future.
The following example explains the cases where [array block size] is manually set and
is not set.
(Example) When [Component D] is to be added in the future
• When 10 is set for [array block size], device numbers are not changed.
• When nothing is set for [array block size], device numbers in and after array No.2
are changed.
Figure 7.37 n (Array No.)
Figure 7.38 [array block size]
Figure 7.39 An example of [array block size]
Planned to
be added
[When the size is set]
(Array block size = 10)
D9 Single wordComponent D
Component name Device Data type
D0 Single word
Double wordD1
D3 String (12 characters)
Component A
Component B
Component C
[When the size is not set]
Component D
Component A
Component B
Component C
Component D
Component A
Component B
Component C
n=1 n=2 n=3
n=1 n=2 n=3
D0 D10 D20
D9 D19 D29
D21 to D22D11 to D12D1 to D2
D3 to D8 D13 to D18 D23 to D28
D9
D0
D9
D10
D18
D20
D10 to D11
D11 to D12
D1 to D2
D3 to D8
D19 to D20
D21 to D22
D12 to D17
D13 to D18
D21 to D26
D23 to D28
D19 D29