Filter
Top Products
4
- 18
4.7 CompactFlash Card
4.7.2 Installation/removing the CompactFlash card
4
SETTINGS AND PROCEDURE TO OPERATION
2 Install the CompactFlash card.
When installing the CompactFlash card into the MES interface module, pay
attention to the orientation of the card.
Push the CompactFlash card securely into the slot until it is flush with the EJECT
button.
3 Lower the LED cover on the front of the MES interface module until it clicks.
When a CompactFlash card is installed, the CompactFlash card slot cover cannot
be attached to the MES interface module.
Save the removed CompactFlash card slot cover carefully.
4
Figure 4.15 Installation of a CompactFlash card
EJECT button
CompactFlash card slot
LED cover
Orientation of a
CompactFlash
card
CompactFlash card
Insert in
this direction.
Tab direction
QJ71MES96
SD/
RD
100
M
10BASE-T/
100BASE-TX
CF CARD
PULL