Filter
Top Products
7
- 56
7.9 Server Service Setting
7.9.1 Setting items in Server Service setting
7
MES INTERFACE FUNCTION CONFIGURATION TOOL
(5) User name (Up to 30 characters)
Set a user name used to access the server computer.
For characters that can be used for user names, refer to the following:
Appendix 2.3 Characters available for character string constants, etc.
(a) When [Database server] is selected for [Server type]
Set a user name that is required for ODBC access.
(b) When [Application server] is selected for [Server type]
Set the account user name used for the operating system of the application server
computer.
(6) Password/Confirm password (Up to 30 characters)
Set a password used to access the server computer.
For characters that can be used for passwords, refer to the following:
Appendix 2.3 Characters available for character string constants, etc.
(7) Access error notification setting
(a) [Notify the access error status]
Set whether to enable or disable notification of the access error status.
If the [Notify the access error status] box is checked, an error occurred in access
to the server computer is reported to a tag component.
(b) When [Notify the access error status] is selected, choose a tag component into
whose device the access error status data is stored.
Note that the following tags are not selectable.
• Tags for which [Prohibit data writing] is enabled
• Tags for which [Array setting] is set
(c) Data are stored as follows depending on the data type.
Table 7.45 Values for [Notify the access error status]
Data type of tag
component
Description
Bit
OFF : Normal/Not accessed
ON : Access error status
Other than the above
0 : Normal/Not accessed
1 : Access error status