Filter
Top Products
APPENDICES
Appendix 6 Data Collection Method for CPUs that cannot be Accessed Directly
App
- 63
9
XML MESSAGE
FORMAT
10
TROUBLESHOOTINGAPPENDICESINDEX
(b) [Refresh settings] for the Motion CPU (CPU No. 2)
Set the number of points to be sent and devices stored to the auto refresh area in
the CPU shared memory of the Motion CPU.
(Example): D256 to D511 Auto refresh area 0000 to 00FF
(c) [Refresh settings] for the QCPU (CPU No. 1)
Set the number of points and devices of the QCPU to which auto refresh area
data in the Motion CPU shared memory is stored.
(Example): CPU No. 2 auto refresh area 0000 to 00FF D256 to D511
(d) [Device tag settings] for the MES interface module
Register the QCPU (CPU No. 1) devices (devices set for refreshing) in the device
tag.
(Example): Register D256 to D511 in tag 1.
Figure App.7 [Refresh settings] for the Motion CPU (CPU No. 2)
Figure App.8 [Refresh settings] for the QCPU (CPU No. 1)
Figure App.9 Acquisition example of the Motion CPU device data
QCPU (No.1)
D256
D511
D256
D511
0000
00FF
Device
Tag 1
Component
Component
Component
Device
CPU shared memory
Auto refresh area
MES interface
module
Motion CPU (CPU No.2)